Cleaning and Maintenance Guide

Entrance matting is an investment in interior floor covering protection. More importantly, it contributes to underfoot safety, even in dry dust situations.

Selecting the right matting for specific entrance areas is imperative for effective scraping/ wiping benefits and durability. This is where evaluating not only the primary purpose of the matting (ie scraping or moisture wiping) but also the levels of footfall is essential. Assess whether the entrance matting solution is suitable for Light, Medium or Heavy Duty use. With the right matting in place, a well planned strategy for regular mat cleaning and maintenance is essential for optimum performance, product lifespan and return on investment.

• Asphalt / Tar
  • White spirit or solvent spot remover followed by a dry foam carpet shampoo or hot water extraction.
• Blood
  • Apply cold water first, then a strong solution (1 teaspoon in
 1⁄2 pint of water) of biological washing powder in cold water, if stain persists. (Enzymes will digest majority of the stain).
• Chewing Gum
  • Apply freeze spray chewing gum remover, scrape the residue, then carpet shampoo.
• Chocolate
  • Cold water followed by dry foam carpet shampoo.
• Coffee, Cocoa or drinking chocolate
  • Wash immediately with cold or warm mild detergent solution, followed by solvent spot remover to remove residual fat.
• Cigarette burns
  • Scrape off carefully using a sharp short bladed knife, then treat with a lukewarm mild detergent solution. In the case of a severe burn on COBA Flooring carpets, a leather punch (1 1⁄2” diameter) can be used to cut out the burn and then the area filled by a circle from the carpet remnants.
• Excrement
  • Mild detergent solution.
• Fat, oil or grease
  • Solvent spot remover followed by mild detergent solution.
• Fatty food
  • Lukewarm biological washing powder solution (1 teaspoon in 1⁄2 pint of warm water). If stain persists after drying, solvent spot remover can be used.
• Ink
  • First water then solvent spot remover.
• Nail varnish
  • Acetone (not nail varnish re-mover).
• Red wine
  • Apply cold water first, then a solution (1 teaspoon in 1⁄2 pint of water) of biological washing powder in cold water.
• Urine
  • Diluted white vinegar solution (acetic acid) followed by mild detergent solution. For old stains consult a professional cleaner.
• Vomit
  • Mild detergent solution then treat with diluted protein spot remover.

General Tips

Spot Cleaning

Removal of spots and spills is inevitable and the golden rule is to deal with these as soon as possible for maximum effectiveness. Depending on each stain, removal products and techniques will vary. In most cases it is recommended that a professional carpet cleaning company with specialist stain technicians is contacted. Handheld spot vacuum cleaning equipment can be useful for the swift sucking up of spilt liquids. COBA’s entrance tile products also allow for easy tile replacement without the need to invest in an entirely new system should they become stained or damaged.

Removal of Dry Soil and Dry Debris

Dry soil is the most common type of soiling to remove from entrance matting and doormats. It can normally be cleaned with an effective vacuum cleaner with relative ease. A regular dry vacuuming schedule will help to reduce soil particles sinking deeper into the carpet pile. In some cases, the matting design is deliberate to allow soil to ‘fall through’ the mat for this very reason. The matting can be lifted and the soil/ debris swept/vacuumed away with ease.

Vacuum

Regular vacuuming is essential for the removal of dry soil from carpet entrance mats to retain a smart appearance. If ignored, dirt particles can be trodden deeper into the mat’s fibres crushing the pile, while becoming sharp, gritty and potentially damaging. This makes cleaning more difficult and matting itself dull in appearance and less effective. Vacuuming is recommended on a daily basis – at least once a day for busy pedestrian traffic. Lighter traffic areas can be cleaned every other day or as required.

Pile Lift Vacuum Cleaning

Pile lifting requires a different type of vacuum cleaner (usually with a dual motor) that is more aggressive in removing deeply embedded soil, and effectively separates the fibres to restore the pile. This should be carried out periodically according to the level of use. Obviously heavy duty areas will require this more frequently (please see table below for frequency recommendations).

Deep Cleaning Hot Water Extraction

This is recommended from time-to- time for a thorough, deep clean. This is especially important for hygienic industries, such as in hospitals, schools, hotels and restaurants. There are specialist carpet cleaning companies who will perform this task. Hot water extraction equipment is also available from a variety of hire companies for rental/purchase. Or you can contact us to book a cleaning service for you with reputable distributors. The hot water extraction method involves a solution of water and cleaning agent. This is sprayed onto the pile and then powerfully vacuumed, which ‘sucks up’ the solution and dirty soil into a holding tank.

If in doubt, please consult COBA’s trained sales consultants who will provide more specific advice about cleaning / maintenance of individual entrance mat products.

Please note: The water that goes through the mat is unlikely to be extracted back into the machine. Open surface mats will need to be lifted afterwards to remove moisture.